Parts stocked on truck
That's the stock across the six areas we work, and it shapes what shows up on the truck - the right spring cable, the right roller size, the right opener logic board, without a guessing game on-site.
Request a quote
Tell Us About Your Garage Door
Send a few details and we'll come back with the next step. The more you tell us about the door, the tighter the estimate.
Prefer to talk? (662) 205-2953 · 6332 Commercial Dr, Olive Branch, MS 38654
Our services
The Work We Take On
Most of the houses we get called to in this area went up between 1980 and 2001, so we spend a lot of time on the garage door hardware that came standard in that build era: steel sectional doors, torsion springs sized for a single-car or double-car opening, and the first couple generations of chain and belt-drive openers.
Core repair services
We handle broken torsion and extension springs, cable replacement, bent or dented panels, off-track doors, worn rollers and hinges, opener repair and replacement, and new door installs when a repair isn't worth doing anymore. We don't do gate systems or commercial rolling doors - if that's what you've got, we'll tell you up front rather than take the job and figure it out later.
Service area coverage
We work out of Olive Branch and cover the surrounding service area, including Byhalia, Hernando, Horn Lake, Lynchburg, Walls, and Coldwater. If your address falls outside that range, ask when you call - we'd rather tell you no than show up without the right parts.
Get in touch
Getting Hold of Us
Call 16622052953 and tell us what the door is doing - won't open, won't close, stuck halfway, making noise, opener running but door not moving. The more specific you can be, the better we can tell you roughly what it'll take before anyone drives out.
We're based at 6332 Commercial Dr, Olive Branch, MS 38654. If you'd rather start online, use the link on our site to send details and we'll call you back.
A phone quote on a straightforward job - a broken spring, a dead opener - is usually close to accurate because those parts are standardized. A quote on a bent track, a damaged panel, or anything involving the door frame itself needs a look in person, because we can't measure bend, rust, or structural damage over the phone.
Our team
Who You Are Dealing With
Serving Olive Branch, MS
We're a garage door repair company working out of Olive Branch, Mississippi. No history page, no anniversary, no story about how we started - just a crew that answers the phone and shows up with the parts for the doors common in this area.
Our service area runs to Byhalia, Hernando, Horn Lake, Lynchburg, Walls, and Coldwater, all within a 10 to 20 mile stretch of town. That's a mix of owner-occupied houses - the area counts roughly 11,147 of them among about 19,467 households total - and most of those garages are original or near-original doors from the 1980s-2001 build window.
We don't inflate what we can do. If a job is outside what we handle - gates, commercial coiling doors, structural framing work - we'll say so instead of taking the call and figuring it out on your driveway.
What to expect
What Comes Next
When you call, we'll ask what the door is doing, roughly how old it is, and whether it's a single or double door - that's usually enough to quote a spring job, a roller job, or an opener swap over the phone.
-
Sight-unseen pricing limits
What we can't price sight-unseen: anything involving a bent or racked track, water or impact damage to a panel, or a door that's been hanging crooked for a while, since the fix there depends on what we find once a panel comes off or a track gets straightened.
-
Winter spring failures
Winters here are cold enough that a spring under tension can snap faster in low temperatures, so if your door's making noise before it fails outright, that's worth a call now rather than after it lets go.
-
Bigger job surprises
Once we've got the details, we'll give you a time window, tell you what we expect to find, and what the range looks like. If it turns into a bigger job once we're on-site - a second spring that's about to go, a cable fraying further down than expected - we'll tell you before we touch it, not after.
Questions
Common questions
Can you give me a price over the phone?
For a broken spring or a dead opener, usually yes - those parts are standard and we can quote close to accurate once we know the door size and type. For bent track, panel damage, or a door that's been off-balance a while, we need to see it, because the fix depends on what shape the hardware is actually in.
Do you work outside Olive Branch itself?
Yes. We cover the surrounding area out to Byhalia, Hernando, Horn Lake, Lynchburg, Walls, and Coldwater. If you're near the edge of that range, mention your address when you call so we can confirm before scheduling.
My house was built in the 1990s - does that matter for the quote?
It can. A lot of the doors we see in this area are original to houses built between 1980 and 2001, which usually means a specific spring and track setup. Knowing roughly when the house was built helps us bring the right parts the first time instead of a second trip.
What won't you quote without seeing the door?
Bent or racked tracks, panel damage from an impact, and doors that have been sticking or sagging for a while. Those depend on what we find once we get hands on it, so we'll look first and quote before doing the work.
Ready when you are
Need a garage door sorted in Olive Branch?
Olive Branch Garage Door Pros repairs and installs garage doors, springs and openers in Olive Branch, MS and the surrounding area.